Dyme PRO/SPEC™ B-Type Reusable Swivel: Experience the ultimate flexibility and one-handed tool-free connection, with built in safety features including dual FLUOROK™ FKM O-rings sealing the barrel to the adapter, a secondary overlock channel to jam the pull ring, and a high visibility band to ensure your fitting is locked on at a glance.
🔑 KEY FEATURES
Forged 6061-T6 Aluminum Body: Black anodized for corrosion resistance and durability. Precision forged and machined, eliminating welded weak points where possible for maximum strength.
180° Swivel Adjustment: Ensures easy, stress-free hose routing in tight spaces. Allows post-crimp clocking adjustment for perfect hose alignment (no pre-clocking required).
Dual FLUOROK™ FKM Seals: Superior chemical/heat resistance (constant 205°C/401°F). Dual sealing on the fluid connection AND swivel mechanism provides extra redundancy, safety, and virtually eliminates leak paths.
Reusable Compression Design: Secure, non-permanent connection for easy assembly of components without the use of specialized equipment, allowing for re-use and servicing of hoses over time.
Service Kits Available: Keep your fittings in peak condition for years with replacement seals and component kits.
✅ COMPATIBILITY
PRO/SPEC™ B-Type works with these hoses; SUPERSTRASSE-R™ ALCOPRO™ CPE+EPDM+SS (MAX 150°C/302F). Fittings may be compatible with hoses from other brands, however Dyme cannot endorse or guarantee the performance of these combinations.
FLUOROK™ FKM Seal Compatibility; Common fuels (gasoline, ethanol), motor oil, gear oil, transmission oil, coolant, air, (constant 205°C/401°F).
⚠️ NOT Compatible With: Methanol & Nitromethane fuels.
For Methanol/Nitromethane:* Use PRO/SPEC HM-Type (METHODEX™ seals) or HX-Type (DYMAX-F™ seals), or FATBOY H-TYPE AN fittings.
Size-Specific Cross-Compatibility:**
PS06/AN06:** Fits SAE J2044 3/8" barbs.
PS05/AN05:** Fits 5/16" SAE J2044 barbs.
PS sizing is equivalent to AN for selection and flow.
⚠️ IMPORTANT SIZING NOTE:
All PRO/SPEC™ B-Type fittings require a matching PS-size adapter for your specific port. Ensure you select the correct adapter (e.g., a PS08 fitting requires a PS08 adapter, equivalent to AN8). Most options of interfacing thread type and standard are available, along with welding and fabrication options.
Dyme PRO/SPEC™ B-Type Reusable Swivel: Experience the ultimate flexibility and one-handed tool-free connection, with built in safety features including dual FLUOROK™ FKM O-rings sealing the barrel to the adapter, a secondary overlock channel to jam the pull ring, and a high visibility band to ensure your fitting is locked on at a glance.
🔑 KEY FEATURES
Forged 6061-T6 Aluminum Body: Black anodized for corrosion resistance and durability. Precision forged and machined, eliminating welded weak points where possible for maximum strength.
180° Swivel Adjustment: Ensures easy, stress-free hose routing in tight spaces. Allows post-crimp clocking adjustment for perfect hose alignment (no pre-clocking required).
Dual FLUOROK™ FKM Seals: Superior chemical/heat resistance (constant 205°C/401°F). Dual sealing on the fluid connection AND swivel mechanism provides extra redundancy, safety, and virtually eliminates leak paths.
Reusable Compression Design: Secure, non-permanent connection for easy assembly of components without the use of specialized equipment, allowing for re-use and servicing of hoses over time.
Service Kits Available: Keep your fittings in peak condition for years with replacement seals and component kits.
✅ COMPATIBILITY
PRO/SPEC™ B-Type works with these hoses; SUPERSTRASSE-R™ ALCOPRO™ CPE+EPDM+SS (MAX 150°C/302F). Fittings may be compatible with hoses from other brands, however Dyme cannot endorse or guarantee the performance of these combinations.
FLUOROK™ FKM Seal Compatibility; Common fuels (gasoline, ethanol), motor oil, gear oil, transmission oil, coolant, air, (constant 205°C/401°F).
⚠️ NOT Compatible With: Methanol & Nitromethane fuels.
For Methanol/Nitromethane:* Use PRO/SPEC HM-Type (METHODEX™ seals) or HX-Type (DYMAX-F™ seals), or FATBOY H-TYPE AN fittings.
Size-Specific Cross-Compatibility:**
PS06/AN06:** Fits SAE J2044 3/8" barbs.
PS05/AN05:** Fits 5/16" SAE J2044 barbs.
PS sizing is equivalent to AN for selection and flow.
⚠️ IMPORTANT SIZING NOTE:
All PRO/SPEC™ B-Type fittings require a matching PS-size adapter for your specific port. Ensure you select the correct adapter (e.g., a PS08 fitting requires a PS08 adapter, equivalent to AN8). Most options of interfacing thread type and standard are available, along with welding and fabrication options.
Image 1 of 16
Image 2 of 16
Image 3 of 16
Image 4 of 16
Image 5 of 16
Image 6 of 16
Image 7 of 16
Image 8 of 16
Image 9 of 16
Image 10 of 16
Image 11 of 16
Image 12 of 16
Image 13 of 16
Image 14 of 16
Image 15 of 16
Image 16 of 16
